Page 1 of 1
holes
Posted: Wed Nov 02, 2011 8:42 pm
by pheonixsoul25
hey does anyone know what progressive charges to drill an tank ?? my over flow box broke and almost flooded my dinning room. moving next week so i have to break tank down any way might as well have drilled for over flow and for return .....
Re: holes
Posted: Wed Nov 02, 2011 9:15 pm
by Fishfood
It can't be too much and you will be happier when you get it drilled. My guess would be $10 to $15 but I could be way off.
Re: holes
Posted: Wed Nov 02, 2011 9:33 pm
by pheonixsoul25
Yeqh the overflow box was from a smaller tank and needs to be upgraded too only like 300 gph on my 65g gallon no were near what it needs to be lol
Re: holes
Posted: Wed Nov 02, 2011 10:53 pm
by Buddy08
i have a drill bit for a 1 inch bulkhead fitting if you wanted to borrow it. all you have to have is plumbers putty, ductape, a high rpm drill, and water from the tap to do it. If you want to borrow it, send me a PM and we will figure something out
Re: holes
Posted: Sat Nov 05, 2011 9:19 am
by Innerarity Reefs
I drill tanks, $10 a hole. Never broke, cracked, or chipped one out of 30shape or so in the last 2 years.
Re: holes
Posted: Sat Nov 05, 2011 4:20 pm
by pheonixsoul25
Thanks guys I i rounded up all the stuff to do it with so I'm gonna give it a shot
Re: holes
Posted: Sat Nov 05, 2011 5:12 pm
by Innerarity Reefs
Good luck!
Re: holes
Posted: Sat Nov 05, 2011 8:46 pm
by pheonixsoul25
Lol thanks Tj !