Needed: Metal Halide and RO Unit

This forum would make Sanford and Son's proud.

Moderator: snoopdog

Post Reply
User avatar
jerryf
Amoeba
Posts: 36
Joined: Fri May 02, 2003 8:24 pm
Location: Pensacola, FL

Needed: Metal Halide and RO Unit

Post by jerryf »

I am looking for a Metal H :mrgreen: alide that I can mount under my canopy as well as an inexpensive but effective RO unit. I only have a 55 gallon tank, so the output doesn't have to be very high.

If you don't have these but know the best place to look, let me know.
User avatar
snoopdog
Yellow Tang
Posts: 4258
Joined: Mon Feb 17, 2003 7:37 pm
Are you a Bot ?: No
Location: Mobile, Al
Contact:

Post by snoopdog »

I will get you a price on my RO if you are not in a big hurry and used is ok. It is a standard 5 stage RO around 50-60gph with the blue canisters and cartridges are around middle of there life.
"When they was no meat we ate fowl, when there was no fowl we ate crawdad. And when there was no crawdad to be found, we ate sand."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
User avatar
ShagMan
Goby
Posts: 2145
Joined: Fri Feb 21, 2003 3:41 pm
Location: Mobile, AL
Contact:

Post by ShagMan »

50-60 gallons per HOUR? hehehe.
-Josh Murrah
User avatar
snoopdog
Yellow Tang
Posts: 4258
Joined: Mon Feb 17, 2003 7:37 pm
Are you a Bot ?: No
Location: Mobile, Al
Contact:

Post by snoopdog »

Ok GPD, it was about 1am when i posted that
"When they was no meat we ate fowl, when there was no fowl we ate crawdad. And when there was no crawdad to be found, we ate sand."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
User avatar
reeferpuffer
Astrea snail
Posts: 1017
Joined: Sat Feb 22, 2003 12:08 am
Location: daphne, alabama

Post by reeferpuffer »

GPH..lol, sounds bad ass...lol
User avatar
jerryf
Amoeba
Posts: 36
Joined: Fri May 02, 2003 8:24 pm
Location: Pensacola, FL

Post by jerryf »

I'm not in any hurry. just let me know how much.

Thanks.
Post Reply