Page 1 of 2

Your #1 DIY reef project

Posted: Sun Sep 07, 2003 12:26 am
by SaltnLime
Wanted to start a thread where everyone could place their favorite DIY reef project. Please include as much info as possible....hopefully we can all learn something...as well as others who join us in the futures.

This does not have to be an elaborate project...sometimes....no most times it's the small stuff that really makes a difference.

Posted: Sun Sep 07, 2003 9:22 am
by lzb3
Right now we are working on a Nilsen reactor. It should make the exhorbidant (sp?) amount of kalk that this tank requires, easier to dose by keeping it stirred.

I will let you know how it turns out.

Elizabeth :roll:

Posted: Sun Sep 07, 2003 10:06 am
by Scott
Did you see the huge kalk reactor in Kevin's thread about the 240 gallon in wall tank? I think it is on one of the last pages of the linked thread.

Posted: Fri Sep 12, 2003 10:54 am
by SaltnLime
no one else has done a DIY reef project?

Posted: Fri Sep 12, 2003 11:29 am
by ShagMan
There are threads elsewhere on MBRK where I:

*) did a PVC "liverock rack" to reduce liverock used, increase filtration, and give the fishies some hiding / swimming room.

*) modded my HOB overflow to have a Durso standpipe and a "damsel guard" out of cheap plastic mesh available at HD/Lowes.

I think those are my best DIY projects over the past year or so.

Posted: Thu Sep 18, 2003 10:42 pm
by KrazyPlace
I just completed a moon light setup using 6 500TB4D Super Blue LEDs. I set 3 in series and each series in parallel. Each series required a 1/4 watt - 100 Ohm resistor and I used a 450 mA 120VAC to 12.6VDC transformer from Radio Shack. The light operates between 465 and 473 nM wavelength. The light is very dim and looks very good! I saw the idea at this link. Take a look and let me know if anyone else has messed around with the moon lighting using LEDs.

Posted: Thu Sep 18, 2003 11:04 pm
by Brandon
I went ghetto and installed a blue rope-light from Wal-Mart in my canopy... but I REALLy like the results.

Posted: Thu Sep 18, 2003 11:45 pm
by SaltnLime
Brandon wrote:I went ghetto......

:lol: :lol: :lol:

Posted: Fri Sep 26, 2003 6:32 pm
by ShagMan
Got any pics of how the blue rope light looks? I liked Terry's idea about night lighting, he just had two blue "party bulbs", in a socket on each end of his 240.

Posted: Sat Sep 27, 2003 4:05 pm
by evermann
I recently saw KrazyPlaces 6 blue led's as moonlights and IMO thy roxors...Thy actually give a shimmering effect sim to MH's...The fish were sleeping and the corals were closed but you could see very well into the tank....Time for barder me thinks.. :D

Posted: Sat Sep 27, 2003 4:31 pm
by KrazyPlace
Thanks evermann! I have also setup my 29G with 6 LEDs using a 24V transformer all in series with 300 Ohms of resisters.

Posted: Sun Sep 28, 2003 3:37 pm
by SaltnLime
evermann wrote:I recently saw KrazyPlaces 6 blue led's as moonlights and IMO thy roxors...Thy actually give a shimmering effect sim to MH's...The fish were sleeping and the corals were closed but you could see very well into the tank....Time for barder me thinks.. :D
Yeah, I love the few I have set up on my small tank...and they do shimmer. I mounted mine to face the reflector and then go back to the tank.

Posted: Sun Sep 28, 2003 7:56 pm
by Snakeman
KrazyPlace wrote:I just completed a moon light setup using 6 500TB4D Super Blue LEDs. I set 3 in series and each series in parallel. Each series required a 1/4 watt - 100 Ohm resistor and I used a 450 mA 120VAC to 12.6VDC transformer from Radio Shack. The light operates between 465 and 473 nM wavelength. The light is very dim and looks very good! I saw the idea at this link. Take a look and let me know if anyone else has messed around with the moon lighting using LEDs.
Where did you get the leds from? I was thinking about rigging something like that up. If you have more details could you email them to me. I would like to come by some time an check them out a see how you have them put together.

Posted: Sun Sep 28, 2003 8:31 pm
by KrazyPlace
Snakeman - Read my first post on this thread. I have some links to the LED vender and a website that will help you build it.

Basically you need a 120VAC to either a 12VDC or 24VDC transformer. You also need a resister. The resister size is calculated by subtracting the transformer's DC voltage output by the total voltage of the LEDs and divided by the amperage you want the LEDs to operate at: (12.6V - 3 x 3.4V) / 0.020 amps (20 mA) = 100 Ohms. The resister must be on the positive side. With this calculation you will have 3 LEDs in each series. You can have as many parallel LEDs as you like as long as you do not exceed the amperage of the transformer. The total amperage of the circuit is additive. Solder it all together to a wall plug and you’re done.

The LEDs are about $20-$25 for 15, the resistors are $0.99 for a 5 pack and the transformer is $7.99 at radio shack. Draw it out and if you have question let me know.

Posted: Mon Sep 29, 2003 11:47 pm
by snoopdog
How do the LED's hold up to salt water corriosion over time ? I am just wondering if anyone has had issues with it that have done these. It is a very good idea and many reefers have made LED light setups. I just have not seen any follow ups on if they corroded around the salt water.