Page 1 of 1

DIY Stand

Posted: Fri Feb 12, 2010 9:52 am
by Fishfood
I've seen all of these designs with 2x4s for the frame. I don't want to do that. I know Phil build a stand for a 180 without a frame. The plywood held the weight. I was going to go with 1x4's. I saw a post on RC where Phisher made a stand with 1x4's for the frame but the pictures didn't work. Phisher, do you still have those pictures. I was going to go with 1x4's and skin it with either 1/4 inch or 1/2 inch birch or sanded ply. This is for a 36x18 65 gal tank.