controllers

Kart Racer · Post by **Kart Racer** » Thu Oct 13, 2005 4:05 pm

I dont want to hijack your thread KrazyPlace but is that all there is to making the 2 part additive?

Brandon · Post by **Brandon** » Thu Oct 13, 2005 4:52 pm

Not using a controller (per say), tank fluctuates between 79.5-81 and do not run any fans. I do use a temp controller on my homemade chiller in the crawlspace. I trust the temp controller much more than I would an AQII.

We've been using x-10 stuff for about 6-7 years. They are flakey as hell, lights will be on in the morning that were off when you went to bed, signals won't cross a phase, I know they sell a bridge for this, but I'm too lazy to fool with it. Had quiet a few go out also, I would want them on my tank for anything, but that's just my opinion.

This seems like a pretty nifty device also: http://www.digitalaquatics.com/

Redfish · Post by **Redfish** » Thu Oct 13, 2005 9:34 pm

Yes, the two part additive is that simple.

Vist the Reef Central chemistry forum for more info.

Phil

KrazyPlace · Post by **KrazyPlace** » Fri Oct 14, 2005 6:14 am

Kart Racer wrote:I dont want to hijack your thread KrazyPlace but is that all there is to making the 2 part additive?

http://www.mbrk.com/viewtopic.php?t=1193&highlight=two

KrazyPlace · Post by **KrazyPlace** » Fri Oct 14, 2005 6:15 am

No one else uses a controller?

Post by **snoopdog** » Fri Oct 14, 2005 7:08 am

Terry(tbmoore) used a Squid. Xster used a AQII.

KrazyPlace · Post by **KrazyPlace** » Sat Oct 15, 2005 7:36 pm

snoopdog wrote:Terry(tbmoore) used a Squid. Xster used a AQII.

I read Terry's post after Katrina hit... what ever happen to him? Did he get his house back together yet?