Sump Needed
Moderator: snoopdog
Sump Needed
I got the no-sump blue’s….Ok, I called Ocean View via or conversation at the meeting and was told they are a distributor and can’t sell to the public….I’m trying to get a 40g or 45g and install 2 dividers and add 2 bulkheads but, honestly don’t feel like being reamed by B&B, The WT (no offence) or Rich…Any sugg’s? Anyone got either of these two tanks that r used for sale? Doesn’t matter if scratched, its going under the stand.
Last edited by evermann on Tue Sep 02, 2003 4:35 pm, edited 1 time in total.
How much for de women? *twack*
Ahh, your kung-fu is strong...
Ahh, your kung-fu is strong...
When I called around for my 240G, the cheapest "asking price", if you don't know anybody, for a new aquarium by itself (no stand/etc.) was through Rich. Give him a call, you might be surprised. Rich quoted me 950 on a new 240G w/ two overflows (delivery extra of course). I would try Rich, Waggy Tail, and then B&B as a last resort. 40/45G is a weird size, I don't know anyone with one used... I surely don't have one.
-Josh Murrah
- harbingerofthefish
- Copepod
- Posts: 393
- Joined: Sun Feb 23, 2003 2:55 pm
- Location: ^^Harbinger wishes he was way up here^^ - um...can we say abuse of power here?! and memphis, tn ;)
- Contact:
- Scott
- Goby
- Posts: 2495
- Joined: Wed Feb 19, 2003 9:00 pm
- Are you a Bot ?: No
- Location: West Mobile
- Contact:
If you are handy you could build one out of 1/4" acrylic. I have a link to some information, but you had better be ready to do some serious reading:http://reefcentral.com/forums/showthrea ... adid=96763 I thought about building one, a 4x8 sheet of acrylic is less than $100 and you could make two out of it.
Wanted: to set up a tank again.
- harbingerofthefish
- Copepod
- Posts: 393
- Joined: Sun Feb 23, 2003 2:55 pm
- Location: ^^Harbinger wishes he was way up here^^ - um...can we say abuse of power here?! and memphis, tn ;)
- Contact:
You could probally do the same with 1/8th" acryllic
here's an idea I have:
get a sheet of 1/2' plywood. Like $9.00
rip it down to make a box the size you want it.
On the long sides rip the acr. to fit the whole size. in the corners drill holes through all the pieces to make the box.
cut acr. to fit the bottom and sides.
silicone the crap out of the seems. Should probally only run 30-40 dollars.
Basically a wood box with an acryllic liner. Since it's under the tank and a sump, you don't need to see through it, or be pretty. Then you can drill plumb and go crazy.
here's an idea I have:
get a sheet of 1/2' plywood. Like $9.00
rip it down to make a box the size you want it.
On the long sides rip the acr. to fit the whole size. in the corners drill holes through all the pieces to make the box.
cut acr. to fit the bottom and sides.
silicone the crap out of the seems. Should probally only run 30-40 dollars.
Basically a wood box with an acryllic liner. Since it's under the tank and a sump, you don't need to see through it, or be pretty. Then you can drill plumb and go crazy.
"nothing is the matter, it don't matter what you think"
- harbingerofthefish
- Copepod
- Posts: 393
- Joined: Sun Feb 23, 2003 2:55 pm
- Location: ^^Harbinger wishes he was way up here^^ - um...can we say abuse of power here?! and memphis, tn ;)
- Contact: