Page 1 of 1
piping?
Posted: Sun Aug 05, 2007 2:23 pm
by underwaterblues
i have a 75 gallon reef ready tank..it was made by the company in mississippi but i dont have the piping.is there any way i can go about getting the piping?
Posted: Sun Aug 05, 2007 4:20 pm
by Phisher
Is it just pvc you need?
Posted: Sun Aug 05, 2007 8:21 pm
by underwaterblues
yeah and the bulk heads..when i got the tank it came with everything but i had to take it down i had to cut the pipe..i was just wondering if you could get the pipe already cut and put together like it was when i got it.
Posted: Mon Aug 06, 2007 8:50 am
by Phisher
I doubt you could find anything that required no cutting or modifying. Pvc is pretty easy to work with, if you are handy at all you could try to do it yourself. Its also cheap if you mess up and start over you won't be out much money.
On the other hand, you could find a store like Progressive Marine that does set ups and maintenance services that would do the plumbing for you.
Joe
Posted: Mon Aug 06, 2007 6:13 pm
by sb1227
Are you talking about the drain and return piping that goes inside the overflow or the plumbing to and from the sump?
Posted: Mon Aug 06, 2007 6:53 pm
by underwaterblues
the piping inside the overflow box... both pipes
Posted: Mon Aug 06, 2007 8:31 pm
by sb1227
You can order a durso standpipe made to fit your box. Honestly though, they're simple to make yourself. Here's Richard Durso's page, he gives instructions to build one or I believe they'll still make them for you if you want to do it that way.
http://www.dursostandpipes.com/
Bulkheads you can order online anywhere, Marine Depot has them and so do alot of LFS.