Black Acrylic

Fishfood · Post by **Fishfood** » Sat Mar 07, 2009 5:40 pm

Does anyone know of a place locally that sells sheets of black acrylic. I really only need a piece that is 1ft square. It doesn't need to be thicker than a 1/4 inch and could possibly be thinner than that.

kristo · Post by **kristo** » Sat Mar 07, 2009 7:26 pm

ummm...

noo... ill have to look into that... 1st place i would think would be home depot... funny words...

AquariKeeper · Post by **AquariKeeper** » Sat Mar 07, 2009 8:16 pm

Fishfood wrote: It doesn't need to be thicker than a 1/4 inch and could possibly be thinner than that.

Sorry, just noticed an oppurotunity to quote an innuendo!!!

Fishfood · Post by **Fishfood** » Sat Mar 07, 2009 8:46 pm

kristo wrote:ummm... noo... ill have to look into that... 1st place i would think would be home depot... funny words...

Home depot only carries clear stuff.

Neuticle · Post by **Neuticle** » Sat Mar 07, 2009 10:18 pm

There are a couple of plastics suppliers in the phone book, I have no experience with anyone local though.

BigPumper · Post by **BigPumper** » Sat Mar 07, 2009 10:46 pm

call this guy. His shop is right behind nordan smith near the same area as progressive.

Plastic material sales inc 661 2247.

I have bought clear acrylic material from him numerous times and I think I remember seeing some smaller dark cut offs.

Squirrelboy · Post by **Squirrelboy** » Sun Mar 08, 2009 12:31 am

What are you using it for?
I only ask because depending on you answer couldnt you just paint a clear piece?
Depending on use only one side would need to be informed.

Fishfood · Post by **Fishfood** » Sun Mar 08, 2009 8:58 am

Squirrelboy wrote:What are you using it for?
I only ask because depending on you answer couldnt you just paint a clear piece?
Depending on use only one side would need to be informed.

I'm using it for a false wall for a 5.5 gal nano I'm putting together. I don't want to paint it. I found a place on line if I don't find something local.

BigPumper · Post by **BigPumper** » Sun Mar 08, 2009 1:07 pm

Fish- if you need weld-on I have some. A large tube of #16 and a quart or so of #4. You can't have them but you are welcome to use some.

Fishfood · Post by **Fishfood** » Sun Mar 08, 2009 2:33 pm

I shouldn't need it. I have some 16. I'll be using silicon to attach the wall to the glass.

BigPumper · Post by **BigPumper** » Sun Mar 08, 2009 4:01 pm

You know silicone does not bond permanatley to acrylic right?

Fishfood · Post by **Fishfood** » Sun Mar 08, 2009 5:49 pm

BigPumper wrote:You know silicone does not bond permanatley to acrylic right?

but weld-on does not bond to glass either. I've made a few sumps from glass tanks with plexi or acrylic dividers all done with silicon. Never had a problem. Actually I had a hell of a time trying to remove some of the dividers when I wanted to change things up.

Black Acrylic

Black Acrylic

Re: Black Acrylic