Razor blade on glass
Moderator: snoopdog
- snoopdog
- Yellow Tang
- Posts: 4258
- Joined: Mon Feb 17, 2003 7:37 pm
- Are you a Bot ?: No
- Location: Mobile, Al
- Contact:
Razor blade on glass
What is everyone's thoughts on cleaning the glass with a razor blade, or have you had bad experiences with that ? Our two tanks get different kinds of algea. The 29 gallon gets hard green / red algea and the normal credit card does not do much. The 26 gallon gets film algea, I can wipe this off with anything. I am thinking about taking a razor to the 29 gallon, what do you think ?
"When they was no meat we ate fowl, when there was no fowl we ate crawdad. And when there was no crawdad to be found, we ate sand."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
- Amphiprion
- Astrea snail
- Posts: 1472
- Joined: Sat Mar 05, 2005 10:41 pm
- Location: Mobile, AL
Lots of things can cut glass easily. I have been using razor blades on my particular tank for well over ten years and there is no visible damage. Sure, if you angle it incorrectly it will cut glass, but the only visible scrapes on my tank over the years are from fallen rocks. Most of the glass that is used in tanks is plenty hard enough from various impurities (at least when using the blade correctly) to prevent scratches via routine scraping.
Andrew
25g planted nature aquarium
25g planted nature aquarium
- snoopdog
- Yellow Tang
- Posts: 4258
- Joined: Mon Feb 17, 2003 7:37 pm
- Are you a Bot ?: No
- Location: Mobile, Al
- Contact:
This was just a one time thing to get the glass back clean after someone I am married to let her tank go way too long. Well it is perfect ATM the blade did a great job on the algea, and the Clownfish did a great job on my hand.
"When they was no meat we ate fowl, when there was no fowl we ate crawdad. And when there was no crawdad to be found, we ate sand."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
- snoopdog
- Yellow Tang
- Posts: 4258
- Joined: Mon Feb 17, 2003 7:37 pm
- Are you a Bot ?: No
- Location: Mobile, Al
- Contact:
Yeah that is what bothered me, and why I will not do that often.
"When they was no meat we ate fowl, when there was no fowl we ate crawdad. And when there was no crawdad to be found, we ate sand."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
"You ate what?"--H.I.
"We ate sand."--Cellmate
"You ate sand?"--H.I.
"That's right."--Cellmate
- Amphiprion
- Astrea snail
- Posts: 1472
- Joined: Sat Mar 05, 2005 10:41 pm
- Location: Mobile, AL
Redfish wrote:BAD, BAD, BAD idea. You can never hold it perfectly straight and the thickness of a good razor at the edge will cut the molecular structure of glass very easily.
Did I mention it was a BAD idea.
Use a Pro Scrapper.
Huh? I think your trying to sound like you know something about this?
Both glass and a razor blade can very in hardness depending on the formulation of each. But generally, glass will have a hardness of approximately 6, while a razor will have a hardness of 5 to 5.5. This means that the razor is softer than glass. Worst case senario, they have the same hardness. Either way you would have to try really hard to scratch your glass with a razor.
I have used razors for over 20 years on glass tanks with no ill effects. There is no reason you have to hold it straight. Holding it at an angle works better.
"...cut the molecular structure of glass"...that's funny. Just what is the molecular structure of glass?
- GeoGriffin
- Amoeba
- Posts: 39
- Joined: Thu Aug 25, 2005 9:45 pm
- Location: Andalusia, AL
Oh no! Busting out the Mohs scale:) While its theroreticaly possible since glass can drop down into the 5's based on percentage of amorphous SIO2 and steel can get up into the 6's, I think practical experience from most people is they have never had a problem with scratching the glass. Just be carefull. I use a utility knife razor blade all the time and have never had a problem.
So basiclly, I concur with Stonefish.
So basiclly, I concur with Stonefish.
- Amphiprion
- Astrea snail
- Posts: 1472
- Joined: Sat Mar 05, 2005 10:41 pm
- Location: Mobile, AL
I used a razor for 8 years on my 190 and it scratched it up in a few spots. I have been lucky enough with the new tank that I have not had to clean the glass yet (just run the magnet over it about every 3 weeks or so). My opinion is the razor will scratch the glass if held impropperly or is the blade is bent/warped.
Good Luck,
Jeremy
Good Luck,
Jeremy